In areas where pedestrians and vehicles interact, installing warning systems are a simple addition to improve safety, security and traffic management for any carpark or high-traffic area.
Versatile LED Traffic Signals or Flashing Lights and Sounders can be used to prevent injury and draw awareness to high vehicle or pedestrian traffic in spaces such as emergency service facilities, car parks and garages, mine sites, car washes and warehouses to provide visual and audible warning for added safety and precaution.
Grifco’s warning systems can be easily installed with a wide range of power supplies and are compatible with Grifco commercial door operators.
LED Traffic Signals
The Grifco Traffic Signals are ideal for high-traffic garages and buildings that may only have one way in or out, are situated near or on a pedestrian walkway such as a footpath or in construction zones where over-sized trucks and deliveries may be coming in and out.
The LED lights ensure the safety of pedestrians and vehicles by making sure the coast is clear for both parties to enter or exit safely.
Adaptable and durable, the lights are made from quality materials and are completely weather proof to endure harsh weather conditions.
The LED Traffic Signals are compatible with the following Grifco commercial garage door operators:
- S-Drive: The LED traffic signal power supply can be sourced directly from a 24V supply and operated via onboard relays: the green light will flash at a selected garage door open limit, and red at a closed limit. The red light also flashes when the garage door is moving.
- eDrive +2.0 with Expansion Board: (including mDrive and other operators with mechanical limits when controlled by GLMe2 with Expansion Board). With this opener, the LED traffic signals require a separate 12-24V power supply and are operated via onboard relays: the green light will flash at a selected garage door open limit, and red at a closed limit. The red light also flashes when the garage door is moving.
Flashing Lights and Sounders:
To increase vehicle and pedestrian safety in garages, carparks or construction areas, Grifco’s range of Flashing Lights and Sounders are an easy inclusion to any industrial or commercial site.
Like other Grifco accessories, the Flashing Lights and Sounders are easy to install and connect to an existing operator. IP rated to withstand harsh weather conditions such as severe storms and rain, the flashing lights and sounders can be programmed to operate simply when the garage door is moving or when it’s running under certain conditions – it just depends on which operator you’re using.
The Flashing Lights and Sounders come in two voltages: 12V-24V, and 240V, and are compatible with the following Grifco commercial door operators:
12V-24V:
- S-Drive
- LS-Drive
- eDrive +2.0 with Expansion Board (including mDrive and other operators with mechanical limits when controlled by GLMe2 with Expansion Board)
240V:
- S-Drive
- eDrive +2.0 with Expansion Board (including mDrive and other operators with mechanical limits when controlled by GLMe2 with Expansion Board)
Click here to read more about the Flashing Lights and Sounders compatibility with Grifco commercial garage door openers. For more information, contact Grifco AU: 1800 GRIFCO, NZ: 0800 653 667 or [email protected].